Ramz Rom: Downloads

DiskImageRev2 is a porpular Windows application that is used to write or flash .img files on SD Card or flash drive. This application becomes especially popular when the need to unbrick Qualcomm android devices using the SD Card (Live Suite) method is becoming common.

DiskRev2 Download Link

1. DiskRev2 Download (Mega Link)

How to Use DiskRev2

1. Get your Qualcomm device unbrick files ready. It should be .img format. You can Qualcomm devices unbrick files here.

2. Get an SD Card and FORMAT it. !Important.

3. Download DiskImageRev2 from the link above. Extract it using a ZIP/RAR extractor and copy/move it onto your PC.

4. Slot/Insert your SD Card in a card reader and connect it to your PC.

5. Go to the folder where you copied DiskImageRev2 which was downloaded earlier then, run/launch DiskimageRev.exe preferably, as ADMIN.

6. On launch, DISKIMAGEREV will detect display the drive where your SD Card is connected. If otherwise, browse to select the drive.

7. From DISKIMAGEREV, browse to the folder where you saved/copied the Loader.img file and select it.

8. Now, click Write and wait until DISKIMAGEREV completes writig the files on the SD Card.

Once DISKIMAGEREV has successfully written the files on the SD Card, your SD Card is now bootable! You may now insert it on your bricked Qualcomm device and boot.

DiskImageRev2 Live operation

DiskImageRev2 being used to Write Flash img File On SD Card

When it comes to servicing android devices, android drivers for the particular android device you are working is of greater importance, especially when you are working with Windows PC. Unlike most other android devices SoC (Chipsets), SPD Android devices which are also known as SpreadTRUM android device drivers requires a bit of technicallities when thay are being installed.
In less than 10 minutes from now, you should know how to manually install SpreadTRUM (SPD) android drivers on your PC by following the step by step guides given below.
NOTE: this same tutorial works with Windows XP, Windows 7, Windows Vista, Windows 8, 8.1 and Windows 10.

How to Install SpreadTRUM, SPD Android Drivers On your Windows PC

1. Download Spreadtrum Android drivers on your Windows PC from the download section here.

2. Once downloaded, extract the downloaded file on a folder on your Windows PC.

3. Now, open Windows Device Manager on your computer. To Open: Press Windows Button + R to launch the Run Command. In the Run Command box, type devmgmt.msc and click Enter key.

4. Once device manager is launched, Click on your Computer's name.

5. Now, click Action from menu directly at the top and then, select Add legacy hardware.

6. From the Add Hardware Wizard, click on Next to continue.

7. From here, select Install the hardware that I manually select from a list (Advanced) and click on Next to continue.

8. Now, under common hardware types, select on show all devices and click Next to continue.

9. Now, click on Have Disk. Now, using the browse button, navigate to the folder where you extracted the Spreadtrum Android drivers you downloaded. In that folder, locate SciU2S.INF.
10. Now, your driver should be listed in the blank area. Then, click on Next to continue.

11. Now, again click on Next to continue.

12. Now, you will most likely see Windows Security Dialog Box. Under this Windows Dialog Box. select Install this Driver Software Anyway.
Wait patiently while device manager installs the Spreadtrum driver on your computer before you proceed.

13. Finally, when Windows Device Manager completes the installation of the Spreadtrum android drivers, click on Finish button to close the Add Hardware Wizard.