How to Hard Reset Infinix Surf Smart X350

More often than not, you will need to wipe, factory reset or format your Infinix Surf Smart X350 when you forget the password, pattern lock or any other security barriers you may have set on your Surf Smart X350 to prevent unauthorized third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Surf Smart X350 especially, when you notice a sudden change in your Infinix Surf Smart X350 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Surf Smart X350. NOTE: I- the methods discussed herein will erase all the data on your Infinix Surf Smart X350, therefore, if need be, you should backup every necessary data on your Infinix Surf Smart X350 before you proceed. II- Your Infinix Surf Smart X350 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protection is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Surf Smart X350

1. Power off your Infinix Surf Smart X350. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Surf Smart X350 screen.

3. As soon as Engineering Mode appears on your Surf Smart X350 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Surf Smart X350 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Surf Smart X350: Method 2

1. If your Infinix Surf Smart X350 is Switched off, begin by Switching On the phone.

2. From your Infinix Surf Smart X350 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Surf Smart X350 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Surf Smart X350 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Surf Smart X350 will be rebooted hence, your Infinix Surf Smart X350 has been reset to factory defaults settings and you are now welcomed by the brand new Surf Smart X350.

If after wiping or formatting your Surf Smart X350, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Race Bolt X450

More often than not, you will need to wipe, factory reset or format your Infinix Race Bolt X450 when you forget the password, pattern lock or any other security barriers you may have set on your Race Bolt X450 to prevent unauthorized third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Race Bolt X450 especially, when you notice a sudden change in your Infinix Race Bolt X450 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Race Bolt X450. NOTE: I- the methods discussed herein will erase all the data on your Infinix Race Bolt X450, therefore, if need be, you should backup every necessary data on your Infinix Race Bolt X450 before you proceed. II- Your Infinix Race Bolt X450 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protection is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Race Bolt X450

1. Power off your Infinix Race Bolt X450. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Race Bolt X450 screen.

3. As soon as Engineering Mode appears on your Race Bolt X450 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Race Bolt X450 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Race Bolt X450: Method 2

1. If your Infinix Race Bolt X450 is Switched off, begin by Switching On the phone.

2. From your Infinix Race Bolt X450 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Race Bolt X450 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Race Bolt X450 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Race Bolt X450 will be rebooted hence, your Infinix Race Bolt X450 has been reset to factory defaults settings and you are now welcomed by the brand new Race Bolt X450.

If after wiping or formatting your Race Bolt X450, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Race Lite X401

More often than not, you will need to wipe, factory reset or format your Infinix Race Lite X401 when you forget the password, pattern lock or any other security barriers you may have set on your Race Lite X401 to prevent unauthorized third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Race Lite X401 especially, when you notice a sudden change in your Infinix Race Lite X401 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Race Lite X401. NOTE: I- the methods discussed herein will erase all the data on your Infinix Race Lite X401, therefore, if need be, you should backup every necessary data on your Infinix Race Lite X401 before you proceed. II- Your Infinix Race Lite X401 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protection is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Race Lite X401

1. Power off your Infinix Race Lite X401. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Race Lite X401 screen.

3. As soon as Engineering Mode appears on your Race Lite X401 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Race Lite X401 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Race Lite X401: Method 2

1. If your Infinix Race Lite X401 is Switched off, begin by Switching On the phone.

2. From your Infinix Race Lite X401 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Race Lite X401 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Race Lite X401 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Race Lite X401 will be rebooted hence, your Infinix Race Lite X401 has been reset to factory defaults settings and you are now welcomed by the brand new Race Lite X401.

If after wiping or formatting your Race Lite X401, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix JoyPAD 7 X700

More often than not, you will need to wipe, factory reset or format your Infinix JoyPAD 7 X700 when you forget the password, pattern lock or any other security barriers you may have set on your JoyPAD 7 X700 to prevent unauthorized third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix JoyPAD 7 X700 especially, when you notice a sudden change in your Infinix JoyPAD 7 X700 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix JoyPAD 7 X700. NOTE: I- the methods discussed herein will erase all the data on your Infinix JoyPAD 7 X700, therefore, if need be, you should backup every necessary data on your Infinix JoyPAD 7 X700 before you proceed. II- Your Infinix JoyPAD 7 X700 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protection is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix JoyPAD 7 X700

1. Power off your Infinix JoyPAD 7 X700. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your JoyPAD 7 X700 screen.

3. As soon as Engineering Mode appears on your JoyPAD 7 X700 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix JoyPAD 7 X700 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix JoyPAD 7 X700: Method 2

1. If your Infinix JoyPAD 7 X700 is Switched off, begin by Switching On the phone.

2. From your Infinix JoyPAD 7 X700 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix JoyPAD 7 X700 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix JoyPAD 7 X700 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix JoyPAD 7 X700 will be rebooted hence, your Infinix JoyPAD 7 X700 has been reset to factory defaults settings and you are now welcomed by the brand new JoyPAD 7 X700.

If after wiping or formatting your JoyPAD 7 X700, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Race Max Q

More often than not, you will need to wipe, factory reset or format your Infinix Race Max Q when you forget the password, pattern lock or any other security barriers you may have set on your Race Max Q to prevent unauthorized third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Race Max Q especially, when you notice a sudden change in your Infinix Race Max Q performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Race Max Q. NOTE: I- the methods discussed herein will erase all the data on your Infinix Race Max Q, therefore, if need be, you should backup every necessary data on your Infinix Race Max Q before you proceed. II- Your Infinix Race Max Q may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protection is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Race Max Q

1. Power off your Infinix Race Max Q. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Race Max Q screen.

3. As soon as Engineering Mode appears on your Race Max Q screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Race Max Q to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Race Max Q: Method 2

1. If your Infinix Race Max Q is Switched off, begin by Switching On the phone.

2. From your Infinix Race Max Q go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Race Max Q will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Race Max Q initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Race Max Q will be rebooted hence, your Infinix Race Max Q has been reset to factory defaults settings and you are now welcomed by the brand new Race Max Q.

If after wiping or formatting your Race Max Q, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Alpha-X570

More often than not, you will need to wipe, factory reset or format your Infinix Alpha-X570 when you forget the password, pattern lock or any other security barriers you may have set on your Alpha-X570 to prevent unauthorized third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Alpha-X570 especially, when you notice a sudden change in your Infinix Alpha-X570 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Alpha-X570. NOTE: I- the methods discussed herein will erase all the data on your Infinix Alpha-X570, therefore, if need be, you should backup every necessary data on your Infinix Alpha-X570 before you proceed. II- Your Infinix Alpha-X570 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protection is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Alpha-X570

1. Power off your Infinix Alpha-X570. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Alpha-X570 screen.

3. As soon as Engineering Mode appears on your Alpha-X570 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Alpha-X570 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Alpha-X570: Method 2

1. If your Infinix Alpha-X570 is Switched off, begin by Switching On the phone.

2. From your Infinix Alpha-X570 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Alpha-X570 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Alpha-X570 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Alpha-X570 will be rebooted hence, your Infinix Alpha-X570 has been reset to factory defaults settings and you are now welcomed by the brand new Alpha-X570.

If after wiping or formatting your Alpha-X570, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Max Race Q-X530

More often than not, you will need to wipe, factory reset or format your Infinix Max Race Q-X530 when you forget the password, pattern lock or any other security barriers you may have set on your Max Race Q-X530 to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Max Race Q-X530 especially, when you notice a sudden change in your Infinix Max Race Q-X530 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Max Race Q-X530. NOTE: I- the methods discussed herein will erase all the data on your Infinix Max Race Q-X530, therefore, if need be, you should backup every necessary data on your Infinix Max Race Q-X530 before you proceed. II- Your Infinix Max Race Q-X530 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Max Race Q-X530

1. Power off your Infinix Max Race Q-X530. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Max Race Q-X530 screen.

3. As soon as Engineering Mode appears on your Max Race Q-X530 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Max Race Q-X530 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Max Race Q-X530: Method 2

1. If your Infinix Max Race Q-X530 is Switched off, begin by Switching On the phone.

2. From your Infinix Max Race Q-X530 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Max Race Q-X530 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Max Race Q-X530 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Max Race Q-X530 will be rebooted hence, your Infinix Max Race Q-X530 has been reseted to factory defaults settings and you are now welcomed by the brand new Max Race Q-X530.

If after wiping or formating your Max Race Q-X530, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Alpha Marvel-x502

More often than not, you will need to wipe, factory reset or format your Infinix Alpha Marvel-x502 when you forget the password, pattern lock or any other security barriers you may have set on your Alpha Marvel-x502 to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Alpha Marvel-x502 especially, when you notice a sudden change in your Infinix Alpha Marvel-x502 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Alpha Marvel-x502. NOTE: I- the methods discussed herein will erase all the data on your Infinix Alpha Marvel-x502, therefore, if need be, you should backup every necessary data on your Infinix Alpha Marvel-x502 before you proceed. II- Your Infinix Alpha Marvel-x502 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Alpha Marvel-x502

1. Power off your Infinix Alpha Marvel-x502. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Alpha Marvel-x502 screen.

3. As soon as Engineering Mode appears on your Alpha Marvel-x502 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Alpha Marvel-x502 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Alpha Marvel-x502: Method 2

1. If your Infinix Alpha Marvel-x502 is Switched off, begin by Switching On the phone.

2. From your Infinix Alpha Marvel-x502 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Alpha Marvel-x502 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Alpha Marvel-x502 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Alpha Marvel-x502 will be rebooted hence, your Infinix Alpha Marvel-x502 has been reseted to factory defaults settings and you are now welcomed by the brand new Alpha Marvel-x502.

If after wiping or formating your Alpha Marvel-x502, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Race Eagle

More often than not, you will need to wipe, factory reset or format your Infinix Race Eagle when you forget the password, pattern lock or any other security barriers you may have set on your Race Eagle to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Race Eagle especially, when you notice a sudden change in your Infinix Race Eagle performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Race Eagle. NOTE: I- the methods discussed herein will erase all the data on your Infinix Race Eagle, therefore, if need be, you should backup every necessary data on your Infinix Race Eagle before you proceed. II- Your Infinix Race Eagle may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Race Eagle

1. Power off your Infinix Race Eagle. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Race Eagle screen.

3. As soon as Engineering Mode appears on your Race Eagle screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Race Eagle to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Race Eagle: Method 2

1. If your Infinix Race Eagle is Switched off, begin by Switching On the phone.

2. From your Infinix Race Eagle go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Race Eagle will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Race Eagle initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Race Eagle will be rebooted hence, your Infinix Race Eagle has been reseted to factory defaults settings and you are now welcomed by the brand new Race Eagle.

If after wiping or formating your Race Eagle, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix JoyPAD 8-X800

More often than not, you will need to wipe, factory reset or format your Infinix JoyPAD 8-X800 when you forget the password, pattern lock or any other security barriers you may have set on your JoyPAD 8-X800 to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix JoyPAD 8-X800 especially, when you notice a sudden change in your Infinix JoyPAD 8-X800 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix JoyPAD 8-X800. NOTE: I- the methods discussed herein will erase all the data on your Infinix JoyPAD 8-X800, therefore, if need be, you should backup every necessary data on your Infinix JoyPAD 8-X800 before you proceed. II- Your Infinix JoyPAD 8-X800 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix JoyPAD 8-X800

1. Power off your Infinix JoyPAD 8-X800. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your JoyPAD 8-X800 screen.

3. As soon as Engineering Mode appears on your JoyPAD 8-X800 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix JoyPAD 8-X800 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix JoyPAD 8-X800: Method 2

1. If your Infinix JoyPAD 8-X800 is Switched off, begin by Switching On the phone.

2. From your Infinix JoyPAD 8-X800 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix JoyPAD 8-X800 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix JoyPAD 8-X800 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix JoyPAD 8-X800 will be rebooted hence, your Infinix JoyPAD 8-X800 has been reseted to factory defaults settings and you are now welcomed by the brand new JoyPAD 8-X800.

If after wiping or formating your JoyPAD 8-X800, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Zero-X506

More often than not, you will need to wipe, factory reset or format your Infinix Zero-X506 when you forget the password, pattern lock or any other security barriers you may have set on your Zero-X506 to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Zero-X506 especially, when you notice a sudden change in your Infinix Zero-X506 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Zero-X506. NOTE: I- the methods discussed herein will erase all the data on your Infinix Zero-X506, therefore, if need be, you should backup every necessary data on your Infinix Zero-X506 before you proceed. II- Your Infinix Zero-X506 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Zero-X506

1. Power off your Infinix Zero-X506. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Zero-X506 screen.

3. As soon as Engineering Mode appears on your Zero-X506 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Zero-X506 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Zero-X506: Method 2

1. If your Infinix Zero-X506 is Switched off, begin by Switching On the phone.

2. From your Infinix Zero-X506 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Zero-X506 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Zero-X506 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Zero-X506 will be rebooted hence, your Infinix Zero-X506 has been reseted to factory defaults settings and you are now welcomed by the brand new Zero-X506.

If after wiping or formating your Zero-X506, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Hot-X507

More often than not, you will need to wipe, factory reset or format your Infinix Hot-X507 when you forget the password, pattern lock or any other security barriers you may have set on your Hot-X507 to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Hot-X507 especially, when you notice a sudden change in your Infinix Hot-X507 performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Hot-X507. NOTE: I- the methods discussed herein will erase all the data on your Infinix Hot-X507, therefore, if need be, you should backup every necessary data on your Infinix Hot-X507 before you proceed. II- Your Infinix Hot-X507 may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Hot-X507

1. Power off your Infinix Hot-X507. You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Hot-X507 screen.

3. As soon as Engineering Mode appears on your Hot-X507 screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Hot-X507 to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Hot-X507: Method 2

1. If your Infinix Hot-X507 is Switched off, begin by Switching On the phone.

2. From your Infinix Hot-X507 go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Hot-X507 will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Hot-X507 initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Hot-X507 will be rebooted hence, your Infinix Hot-X507 has been reseted to factory defaults settings and you are now welcomed by the brand new Hot-X507.

If after wiping or formating your Hot-X507, you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL

How to Hard Reset Infinix Hot Note (X551)

More often than not, you will need to wipe, factory reset or format your Infinix Hot Note (X551) when you forget the password, pattern lock or any other security barriers you may have set on your Hot Note (X551) to prevent unauthorised third-party access to your device.

It may also be necessary that you format, factory reset or wipe your Infinix Hot Note (X551) especially, when you notice a sudden change in your Infinix Hot Note (X551) performances in terms of its speed or level of applications deficiency.

Here, I discuss the step by step procedures involved in wiping, factory reset or formatting your Infinix Hot Note (X551). NOTE: I- the methods discussed herein will erase all the data on your Infinix Hot Note (X551), therefore, if need be, you should backup every necessary data on your Infinix Hot Note (X551) before you proceed. II- Your Infinix Hot Note (X551) may also end up getting stuck at FRP. FRP Lock which is an acronym for Factory Reset Protcetion is a security meansure that restricts access to your android device following a factory reset, hard reset or wipe.

How to Factory Reset your Infinix Hot Note (X551)

1. Power off your Infinix Hot Note (X551). You may do this by pressing and holding the Power Button. If the battery can be removed by you, then; that's also an option.

2. Now, press and hold Volume Down (-) and Power Button for few seconds or until Engineering Mode appears on your Hot Note (X551) screen.

3. As soon as Engineering Mode appears on your Hot Note (X551) screen, release both keys that were held down in Step 2 above.

4. Using Volume Keys to navigate, select Factory Reset / Wipe All Data then, use Power Key to make your selection.

5. Scroll down to Confirm your selection.

6. You may now wait patiently for your Infinix Hot Note (X551) to initialize and complete the Factory Reset/Data Wipe Operation.

NOTE:

1. At the Step 3, you may use combination of both POWER KEY and VOLUME UP (+) KEY.

2. In some Infinix android devices, Clear EMMC appears instead of Factory Reset / Wipe All Data.

How to Format (Wipe) your Infinix Hot Note (X551): Method 2

1. If your Infinix Hot Note (X551) is Switched off, begin by Switching On the phone.

2. From your Infinix Hot Note (X551) go to Settings > Backup & Reset.

3. Tap Factory Data Reset then, select Reset Device.

4. Choose Reset Phone / Erase Everything. Be sure that all the data on your Infinix Hot Note (X551) will be erased/formatted following this step.

5. Select OK to confirm the whole process.

6. Now, wait patiently while your Infinix Hot Note (X551) initializes and performs the Data Wipe (Factory Reset) operation until it is completed.

When the whole process is complete, your Infinix Hot Note (X551) will be rebooted hence, your Infinix Hot Note (X551) has been reseted to factory defaults settings and you are now welcomed by the brand new Hot Note (X551).

If after wiping or formating your Hot Note (X551), you still encounter issues or find yourself at FRP Lock screen, you could use these tutorials to help yourself out.

1. How to Remove FRP Lock On All Android Devices

2. How to Flash and Unbrick Infinix Mi Devices: Tool Studio Method

3. How to Flash and Unbrick MTK Android Devices: For Infinix Mi MTK CPU Phones

4. How to Flash and Unbrick Qualcomm Devices Using QFIL