MEDIACOM Smart Pad 705i Official Android Tablet Firmware
Tuesday, July 30, 2013
Thursday, July 25, 2013
Android Multi Tools_1.0 Wipe Data, Reset User Lock ,Gmail for Android Tablet Pc
Android Multi Tools 1.0 and 1.02
(Reset User Lock ,Gmail Lock , Wipe Data & Much More without Flashing Tablets)
Note: I have personally test and done a lot of tablets with this tool.This tool only works when "debug mode " is activated on Android tablets. To activate debug mode go to setting,Developers,turn on debug mode.
Update: These tools will also work on some android smartphones on fast boot mode.
Update: These tools will also work on some android smartphones on fast boot mode.
Download Link
This tool works with Allwinner tablets when the "debug mode " will be activated.Turn on the tablet and connect with Multi tools. Some Times(rare case) you have to turn android tablet in boot mode. Mostly Allwinner android tablets boot mode is same "hold volume down(-) button ,insert usb cable and shortly press power button approx. 10 time (one sec press). A pop up window will comes out and search for drivers. install android drivers .
1-6 commands can be used with the open marriage Debug Mode only.
7-9 can be used with the machine that faithful into Fastboot Mode only.
Commands to operate .
1.Check Device used to check the connection of the machine mode ADB.
2.Reset User Lock Code using the tools that are in the data is not lost.
3.Reset Gesture Lock machines that are used to draw a line through the data is not lost. After the installation is complete, it will fire up. Then draw anything for a closed lock.
4.Reset GMail using the machine to try to unlock the machine several times to enter to unlock.
5.Wipe Data used to resolve the symptoms or slow down. Or that an error or some missing.
6.Reboot to reboot your PC or from adb shell.
7.Check Device On Fastboot Mode to check the connection of the machine mode FastBoot.
8.Wipe Data / Cache On Fastboot Mode This command is available only Fastboot Mode to resolve the symptoms or slow down. Or that an error or some missing. That is often found in the CPU Spreadtrum.
9.Exit Fastboot Mode to reboot your PC or exit FastBoot.
Usage
Press the number that corresponds to the condition of the machine and then hit enter.
Credit:
This program is conducted by a single line with Thailand Central Thailand Central branch line to the site.
if you not succeeded with this tool then you have to restore android tablet to stock firmware. Find out how to restore Allwinner tablets to stock rom.
Basic Training for Flashing Tablet Pc for newbies
How to restore Android Tablet Pc for Advance Users.
How to restore Rockchip Android Tablets .
Android Tools for Rockchip Tablets
if you not succeeded with this tool then you have to restore android tablet to stock firmware. Find out how to restore Allwinner tablets to stock rom.
Related Posts:
Basic Training for Flashing Tablet Pc for newbies
How to restore Android Tablet Pc for Advance Users.
How to restore Rockchip Android Tablets .
Android Tools for Rockchip Tablets
Sunday, July 21, 2013
Teclast Allwinner A10 Android Tablet Firmware
Teclast Allwinner A10 Hacked & Market Fix Android Tablet Firmware
Board Id: V1.02.71A8 A10 5DM3 4.0.3Tablet Spec:
Chipset : Allwinner A10
Board ID : A10 v1.02.71A8
Brand: Teclast
Android Version : 4.0.4
CPU : 1.2 Ghz
Display: 800 x 600
Display: 800 x 600
Ram : 512 / IGB
flash Memory : 4GB / 8GB
Flashing Tools :
Flashing Tool :LiveSuit Pack
Other good Tools : Android Multi Tools (you can also use this Tool)
When I need to Flash my Tablet ?
1. Forgotten Pattern Lock ,
2.Too many pattern attempt / Reset user lock
3. Android Tablet stuck on Gmail account
4. Android Tablet stuck on Android logo
5.Android Tablet hang on startup
you can use this Android Tablet firmware ROM to make your Android China tablet working again . Make sure to charge battery . Power failure during flashing may result dead or broken tablet.
Flashing stock firmware should be last option.
Download :
Telechip Ingenium TCC8803 7" Android Tablet Firmware
Telechip Tablet Ingenium 7" TCC8803 Allwinner A10 Android Tablet Firmware.
 |
| Property of Allwinner |
Android Tablet
Chipset : Allwinner A10
Board ID : TCC8803
Brand: Telechip
Model : M723
Touch : 7" Capacative
Model : M723
Touch : 7" Capacative
Android Version : 2.3
CPU : Cortex A8 1.2 Ghz
Display: 1024 x 600
Camera : N/A
Display: 1024 x 600
Camera : N/A
Ram : 512 MB
flash Memory : 4GB
External Memory : Maximum 32 GB
HDMI & WIFI : Supported
Speaker : Double Speaker
External Memory : Maximum 32 GB
HDMI & WIFI : Supported
Speaker : Double Speaker
Allwinner A10 Flashing Tools and Tutorials.
Flashing Tool :LiveSuit Pack
Flashing Tutorial:how to flash tablet with Livesuit
Optional Tools : Android Multi Tools
Why Flashing a Tablet ?
The following firmware / ROM file will be used when your Android tablet facing various problems . In case of
1. Forgotten Pattern Lock ,
2.Too many pattern attempt / Reset user lock
3. Android Tablet stuck on Gmail account
4. Android Tablet stuck on Android logo
5.Android Tablet hang on startup
you can use this Android Tablet firmware ROM to make your Android China tablet working again . Make sure to charge battery . Power failure during flashing may result dead or broken tablet.
Flashing stock firmware should be last option.
Download :
Download Tablet Firmware
UNOTEC Tablet v.11.1 Android Tablet firmware .
UNOTEC v.11.1 A
Android Tablet Firmware .
Specifications:
LCD | Capacitive Touch Screen |
Screen Resolution | 1280 x 800 Pix |
Processor | 1.2 Ghz CortexA8 |
Board ID | V11.1 |
RAM | 512 MB DDR3 |
Built in Memory | 4GB |
External Memory | Support Micro Card (upto 16GB) |
Wifi | 802.11 b/g/n supported |
Blue tooth | N/A |
3G | Support USB 3G Dongle, EVDO/WCDMA |
Camera | 0.3 MP Front |
HDMI | 1.4 |
Speaker | Available |
Weight | 299 g |
Android Version | 4.1 |
Flashing Guide Android Tablet.
To identify your android tablet you must disassemble it and find out the Chipset and the accurate firmware version as shown in image.
 |
| how to Identify Tablet flashing tools |
The following firmware / ROM file will be used when your Android tablet facing various problems . In case of
1. Forgotten Pattern Lock ,
2.Too many pattern attempt / Reset user lock
3. Android Tablet stuck on Gmail account
4. Android Tablet stuck on Android logo
5.Android Tablet hang on startup
you can use this Android Tablet firmware ROM to make your Android China tablet working again . Make sure to charge battery . Power failure during flashing may result dead or broken tablet.
Flashing stock firmware should be last option.
Download :
1. Forgotten Pattern Lock ,
2.Too many pattern attempt / Reset user lock
3. Android Tablet stuck on Gmail account
4. Android Tablet stuck on Android logo
5.Android Tablet hang on startup
you can use this Android Tablet firmware ROM to make your Android China tablet working again . Make sure to charge battery . Power failure during flashing may result dead or broken tablet.
Flashing stock firmware should be last option.
Download :
Cube u30gt2 0507 android 4.2 beta Androidtablet firmware
Cube u30gt2 0507 android 4.2 beta firmware
Specifications:
LCD | 10.1" Retina Type 10 Points |
Screen Resolution | 1920 x 1200 |
Processor | Quad Core Cortex A9 GPU Mali 400 |
Chipset / Boxchip | Rockchip RK3188 |
RAM | 2GB DDR3 |
Built in Memory | 32 GB |
External Memory | Support Micro Card (MAX. 32GB) |
Wifi | 802.11 b/g/n supported |
Blue tooth | Supported v2.0 |
3G | Support USB 3G Dongle, EVDO/WCDMA |
Camera | 2 MP Front 5 Mp Back with flash |
HDMI | 1.4 |
Speaker | N/A |
Weight | 290g |
Android Version | 4.1 |
Flashing Tool | RKbatch Tool |
Flashing Tutorials : Flashing Tutorial for Rockchip
Note :
The following firmware / ROM file will be used when your Android tablet facing various problems . In case of
1. Forgotten Pattern Lock
2.Too many pattern attempt / Reset user lock
3.Android Tablet stuck on Gmail account
4. Android Tablet stuck on Android logo
5. Android Tablet hang on startup
6. Wish to upgrade to latest available Android OS.
6. Wish to upgrade to latest available Android OS.
you can use this Android Tablet firmware ROM to make your Android China tablet working again . Fully charge battery before flashing or upgrading . A power failure during flashing upgrading may result broken , dead tablet.
Flashing stock firmware should be last option.
click here to download 4.2.2 beta
M7206 Android 2.3.3 Factory firmware
M
Download Firmware . Copy update.zip file to Root of SD Card
turn your tablet on into recovery mode
Select Install update from SD
Select update.zip and install.
Select update.zip and install.
Wait for process to complete.
If everything goes fine your tablet will be rebooted and you are done.
lenoxx tb-50 Official Firmware.
Allwinner A13 lenoxx tb-50
Android tablet Firmware.
How to Flash Allwinner A13 Tablet ?
Download Appropriate firmware .
Download Livesuit .
Turn on your tablet into boot mode .
Select .img file from firmware .
flash tablet.
See Tutorials:
Saturday, July 20, 2013
Guide to Update Galaxy Tab 10.1 P7500 Official Firmware
How to Update Samsung Galaxy Tab 10.1 P7500 to Latest Official Android Version.
Samsung has been bringing in speedy updates in order to bring the latest Android software to its entire product line up.
UBLPA Android 4.0.4 is the latest Ice Cream Sandwich firmware update for Samsung Galaxy Tab 10.1 3G P7500 that is now available for download.
P7500 UBLPA Android 4.0.4 Ice Cream Sandwich update is a regular maintenance update that usually comes with bug fixes and performance tweaks. If KIES don’t show the firmware then you have download it manually and install it using third party tool. Continue reading this tutorial to learn how to install UBLPA Android 4.0.4 ICS official firmware on Galaxy Tab 10.1 P7500. Please note, this is ODIN flash-able firmware and not CWM recovery flash-able.
Disclaimer: This guide will use a tool; Odin to flash the official firmware on your Galaxy Tab 10.1 P7500. During the process, you might lose all your existing installed apps and personal settings. It is therefore necessary for you to follow the guide carefully. Also, please, do mind that this tutorial is only for Galaxy Tab 10.1 P7500. Don’t try this guide in any other Android device.
The official firmware P7500UBLPA Android 4.0.4 ICS can be installed easily on Galaxy Tab 10.1 3G P7500. To install this firmware we will use ODIN tool. Here you should note, this flashing process may wipe all your existing installed apps and personal settings. You should follow this guide carefully to properly backup your data that you can restore later.
Download :
1. Android 4.0.4 p7500 UBLPA 10.1 TAB
2. Odin all version
Android 4.0.4 UBLPA Firmware Details:
PDA: P7500UBLPA
CSC: P7500CHOLP1
Version: 4.0.4
Date: 2013-01-30
Regions: Brazil
Warning! This tutorial is only for Galaxy Tab 10.1 3G, model number P7500. Don’t try this guide in any other Android device. Check your device’s model number in: Settings » About tablet. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. Although, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Guide to Update Galaxy Tab 10.1 P7500 to UBLPA Android 4.0.4 ICS Official Firmware
Extract the firmware zip file that you have downloaded using the link above, you will then get a .tar file alongside other files.
Extract Odin zip file to get Odin3 v3.07.exe.
Power off your tablet. Wait 5-6 seconds to confirm complete switch off.
Put the Galaxy Tab 10.1 P7500 in Download Mode by pressing and holding Volume Down and Power button until Samsung Galaxy logo appears in tablet screen. Wait for a few seconds and you will be in download mode.
Run Odin3 v3.07.exe (see Step 2) as an Administrator.
Connect your Galaxy Tab 10.1 P7500 with your PC using USB cable. A message will appear under Odin’s message box in the bottom left saying “Added!!”. If you don’t get it, then try another USB port. If that too doesn’t work, then reinstall the USB driver. If you successfully see the “Added!!” message in Odin, you are good to go. Also, check for COM port with a number in Yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted UBLPA firmware folder :
Click the ‘PDA’ Button, and select the .tar file here with *code* appearing in file-name.
Click the ‘Phone’ Button, and select file with *modem* in its name (Ignore, if this file does not file exist).
Click the ‘CSC’ Button, and select file with *csc* in its name (Ignore, if this file does not file exist).
Click the ‘PIT’ Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Please make sure that Re-Partition checkbox is selected, only if you are using a .pit file.
Recheck everything mentioned in Step 7 & 8 above. Hit the ‘START’ button to begin the flashing process.
Once the flashing process is completed, the tablet will reboot automatically and you will see a PASS message in the top-left-most box. You can now unplug the USB cable to disconnect your device from computer.
If you have followed every point described in the guide, your Galaxy Tab 10.1 P7500 should now be running Android 4.0.4 Ice Cream Sandwich build P7500UBLPA. If there are any issues, feel free to post in the comments section for our staff to take a look at it.
Basic steps to Install Firmware on Allwinner A10 / A13 / A31 Tablets.
How to Install Firmware on Allwinner A10 / A13 / A20 /A31 Tablets.
This post is about to how to install Firmware on Allwinner tablets.
Find suitable Firmware file for all Allwinner cpu based tablets .If you don't know about the Chip ID , Disassemble your device and write down the Chip id , (Allwinner , Rockchip , etc ) Camera id , and board ID then have to find the exact firmware.
Advice : loading new firmware is last option.Try find other solutions more than, reinstalling full firmware.
Things you Need :
2. Open Live Suit
3. Select The Image You Downloaded From The Link
4. With Your Tablet Power Off Hold Volume Up Do Not Release The Volume Up And Insert Usb Cable Into The Tablet.
5. Livesuit Will Detect Tablet .
6. Follow The Instructions And You're Done.
Friday, July 19, 2013
Masalah Android Brick dan Berbagai macam Solusinya
Sore bro & sis, Sudah lama tidak posting, hehe. Gimana puasanya masih kuat kan. Oke kali ini saya mau share tentang masalah Android Brick dan berbagai macam solusinya. Kebetulan saya sendiri sudah mengalami hal itu berkali-kali, dari soft hingga hard brick alias benar-benar menjadi bata (tidak bisa boot, tidak bisa dices, dan tidak terdeteksi di pc).
Oke langsung saja, berikut adalah berbagai macam masalah brick
1. Layar hanya berputar di logo saja.
Itu istilahnya "bootloop", masih dalam kategori soft brick, penyebabnya bisa karena menghapus file system, root yang salah, install aplikasi yang salah atau mengandung malware, melakukan tweaking yang salah, mengganti font. Untuk masalah ini anda tidak perlu khawatir, ini bisa diselesaikan sendiri tanpa harus ke service center. Solusinya bisa flash ulang, reset phone (jika memang belum pernah di root), atau install ulang firmware saja.
Tapi bagi rooted user, CWM adalah solusi yang terbaik, karena jika terjadi bootloop, cukup restore backupannya dan semua kembali seperti hasil backup (termasuk semua aplikasi, dan data).
2. Hanya berhenti di boot start, atau layar gelap, namun masih bisa terdeteksi oleh PC.
Ini bisa hardbrick atau softbrick. Penyebabnya macam-macam, tapi mayoritas sudah terlalu jauh oprek systemnya. Jika devicenya tersedia aplikasi untuk unbrick, ini masih termasuk soft brick anda cukup gunakan software unbrick (nama aplikasi berbeda2 tergantung developernya) dan bisa dilakukan sendiri. Namun jika tidak ada software sama sekali maka akan masuk kategori hardbrick dan solusinya hanya tukang service center saja yang tahu.
3. Mati total, Dead Boot, tidak terdeteksi di PC.
Nah ini saya sudah dua kali mengalami ini, satu karena flash sesuatu ke bootloader pada andromax-i, yang menyebabkan handset seperti rusak berat. tidak terdeteksi sama sekali. Yang kedua nexus s, pada saat proses cwm saya coba cabut baterai paksa, hasilnya mungkin bootloader corrupt, jadi nasibnya sama seperti max-i. Jadi penyebab dead boot atau mati total (jika bukan karena masalah hardware) itu karena utak-atik diarea bootloader atau permasalahan flashing firmware jika terjadi interupsi.
Solusinya adalah dengan Riff/JTAG sebuah alat untuk memperbaiki berbagai jenis handphone, tentu saja harganya sangat mahal, sekitar 900.000an keatas. Tapi kita tidak wajib membeli alat itu, cukup datang ke tempat service yang menangani Riff/JTAG khusus handset yang mati di area bootloadernya. Pengalaman saya memperbaiki handset yang mati total, andromaxi di Service center, biaya hanya 1000 rupiah (tukang parkir) karena masih garansi. Lalu untuk nexus s di tempat service umum, waktu itu sempat nanya sekitar 200ribuan.
4. Unbrickable Device
4. Unbrickable Device
Nah ini mungkin istilah yang jarang, ada juga handset yang sangat sulit dibuat brick, disebut dengan unbrickable, contoh di device ini yang pernah saya tes adalah ainol novo 7 aurora, dan onda vx580w (semua chipsetnya allwinner) semuanya saya buat hardbrick (gak bisa dicas, ataupun hidup). Tapi tetap di PC masih bisa dilakukan flashing. Mau dirusak berkali-kali itu systemnya tetap bisa diflash. Nah untuk device ini sangat cocok untuk para developer yang mau mengembangkan software atau yang lainnya karena tidak perlu pusing-pusing lagi mikirin hard brick.
Nah itu saja kira-kira permasalahan android brick menurut pemahaman saya. Jika ada yang salah koreksi saja. Semoga berguna. :) Met puasa.
Thursday, July 18, 2013
Allwinner A13 Q8 v1.5 zhongxing Android Tablet Pc Firmware
Allwinner A13
Q8-v1.5 zhongxing--en-d06-bsr-nossb
Android Tablet Pc Firmware
Encyclopedia:-
Read Article About Allwinner Technology
Frequently Asked Question about Android Tablets
Tablet Flashing Tools:
- Tablet Flashing Tool : Firmware upgrade tool LiveSuit & Drivers
- Tablet Flashing Tool: Firmware upgrade Tool Phoenix Usb Pro
- Flashing with SD Card:Firmware update instruction with microSD card
Flashing Tutorials for Allwinner Tablets:
- LiveSuit Tutorial : how to flash tablet with LiveSuit
- Phoenix Usb PrO Video Tutorial :Tutorial
Recommended Tools for Common Tablet Issues:
You can also use : Android Multi Tools
Common Android Tablets issues :
The following firmware , ROM file will be used when your Android tablet facing various problems .
1. Forgotten Pattern Lock on Android Tablets.
2.Too many pattern attempts / Reset user lock.
3. Tablets PC stuck on Gmail account.
4. Android Tablet PC stuck on Android logo.
5. Tablet Android hang on start-up / Multiple errors generating by OS.
6. Market Android having problems or generating errors.
7.Upgrading to new Android version.
6. Market Android having problems or generating errors.
7.Upgrading to new Android version.
you can use this Android Tablet firmware, ROM to restore your Android China tablets to generic firmwares or upgrades . Make sure to charge battery upto 60%. Power failure during flashing may result dead or broken tablets.
Note : Flashing generic tablet firmware should be last option.
Download Q8 v1.5 firmware.
Other Allwinner Q8 Firmwares might you like :-
- Q8 V6.6 Generic Rom
- Q8 V1.7 Generic Rom
- Q8 V2.6 GSL1680 Generic Rom
- q8-mxc622x-20121101 Generic Rom
- Q8-atm7013 Generic Rom
- Q8 tzx 713B Generic Rom
- Q8-a13-51324 Generic Rom
- Q8 V12 Generic Rom
You may also like to read:
IP701 Branco Do Android tablet Firmware
IP701 Branco Do Android tablet firmware
Android Tablet
The following firmware / ROM file will be used when your Android tablet facing various problems . In case of
1. Forgotten Pattern Lock ,
2.Too many pattern attempt / Reset user lock
3. Android Tablet stuck on Gmail account
4. Android Tablet stuck on Android logo
5.Android Tablet hang on startup
you can use this Android Tablet firmware ROM to make your Android China tablet working again . Make sure to charge battery . Power failure during flashing may result dead or broken tablet.
Flashing stock firmware should be last option.
Installation : Copy firmware to sd card
install from recovery.
Installation : Copy firmware to sd card
install from recovery.
Download :
upgrading Tool for Rockchip Tablets - RKBatchTool
RKBatch Tools for Flashing Rockchip based Tablet Pc.
RkBatch Tool is specially design for flashing and restore Rockchip Cpu based Android tablets Pc.
Tutorials :
For Newbies Learn : Learn how to flash,restore ,install firmware on android tablet pc.You may also like to read : Flashing Tutorial for Rockchip based Tablet PC
Download Flashing Instructions : PDF
Download: RKbatch Tool
Download Flashing Instructions : PDF
Flashing Tools for Rockchip CPU Tablets:
Download: RKbatch Tool
install Android Apps on Blackberry PlayBook
How to Install Android Apps Skype on BLACKBERRY Playbook
Download DDPB
- Power up your Playbook and Go to Settings
- Next Go to the option called Security
- Select the Option Development Mode
- Turn Development Mode On and select an easy to remember Password
- You will notice a Development IP Address this will show up on your main home screen with an icon that shows a guy with a shirt
- Using your Blackberry Web Browser download any Playbook App you want to your Playbook.
- By Default when you download apps using your web browser they are stored in a directory called /downloads/
- Plug your Playbook tablet Into your PC and launch the DDPB .
- On the left hand side it will say Playbook IP address, hit the scan button and it will use the IP address that you used when you setup the Developer security option. If you forget what it was or it won’t scan, click on the guy with the green shirt on your homescreen on the top right hand corner and it will tell you what it is.
- Underneath the IP Address is a password, use the password I told you to use when you setup your developer account under Security.
- Click ADD and Navigate using the Explorer to the Download Directory on your Playbook and Select the Apps you want to install.
Use APK 2 Bar Converter to convert desired Android Apps in .bar playbook app format.
Your apps will install to your Playbook and you now have full access to mainstream applications not currently available in the Blackberry APP World.You must have install JAVA on your PC. During process might you see a error message saying something about a JAR File missing, Google for JAVA 32 BIT.
Subscribe to:
Posts (Atom)