RKBatch Tools flashing Tutorial for RockChip Android Tablets

Rockchip Flash Tool ,Rockchip Batch Tool Android Tablet Flashing  Instructions, 

  Flashing Tutorial for 

 Rockchip  RK2918, RK2928,RK3026 , RK3066 , RK3188  Tablets. 

rockchip batch tool download . How to flash Rockchip Tablets.

Updated: 

Download Rockchip Drivers . 

Download RkBatch Tool (Rockchip based tablet flasher).

Download Desired Firmware . 

How to Connect Rockchip Tablet to Computer .

For Flashing Rockchip tablet you need to put tablet into Boot Mode . Different tablets have different boot mode. Some Rockchip tablets get into boot mode by pressing volume down button and inserting cable. Some Rockchip tablets need to press reset button in reset hole and volume down and insert cable. After successful boot mode you need to install Rockchip drivers.

After completing drivers you can view your connected tablet in Device manager as shown in picture.

Now open RkBatchTool.exe to run Rockchip flasher. 

In Rockchip Batch Tool software you will see Green Bar No. 1 as Connected Devices. If the device will not connect the button will be grey. Put your Rockchip tablet into boot mode again as mention above. 

Now Click on Fw Path button .

A Pop up window will be open. Select the desired firmware which you have already downloaded and extracted before. 

All the option in Rockchip batch tool will be highlighted as you can see in image. 

FW Path: The download firmware which will work with your tablet during firmware upgradation.

FW Ver : Currently Firmware Version 

Boot Var : Will display your kernel boot version. 

Support : Will display Rockchip CPU (RK3066, RK3188 etc). 

Now Click on Upgrade button to start flashing procedure. The Green bar button will blink during flash and multiple layers will start running inside Rockchip Flash tool. 

First Rockchip Flash  tool will test multiple option on your Android tablet and then it would start downloading firmware on Rockchip tablet.  

After 100% download Rockchip Flash Tool will verify downloaded firmware. 

If the procedure went good you will see Green bar down inside the Rockchip Flash Tool.

Upgrade Done Success <1> Fail <0> Time <xxxx>ms

This line will be verified 100% successful firmware upgrade on Rockchip Android Tablets.

Before Flash charge your tablet more than 60%. Do not panic during flashing . Power failure during flashing rockchip tablet may harm ful for tablet. 

Other Knowledge base Posts : 
LiveSuit Flashing Tutorials
PhoenixSuit Flashing Tutorials 
Action Chip Tablet Flashing Tutorial 
How to Repair / Replace invalid Imei on Android Tablets