To flash your Karbonn Titanium S202, you need to download the Karbonn Titanium S202 stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Karbonn Titanium S202.
Please note that flashing this Stock ROM Firmware on your Karbonn Titanium S202 will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files and data.
Note: If your Titanium S202 is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Karbonn Titanium S202 Stock ROM Firmware Download Link(s)
1. Karbonn Titanium S202 (v009 20150417) Stock Firmware
2. Karbonn Titanium S202 (v013 20150615) Stock Firmware
How to Flash Stock Firmware On Karbonn Titanium S202
1. Download your Karbonn Titanium S202 stock ROM firmware from the link above.
2. Extract the Karbonn Titanium S202 Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD drivers from here
4. Now, choose either of the tools listed below here to load the stock firmware on your Karbonn Titanium S202.
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Karbonn Titanium S202.
2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Karbonn Titanium S202, if need be.
No comments:
Post a Comment