How to fix Bootloop Cherry Mobile Flare S5

This tutorial learn how to fix bootloop Cherry Mobile Flare S5. 

Also the purpose of this is to revive your voided warranty and revert back to original OS, Partition,

Recovery, Logo and etc.

This fulldump stockrom also have Dolby good for sound management.

In this instruction you need PC , Desktop or Laptop and working USB cable. Also this method works  Windows OS 7, 8, 8.1 and 10 only.

Requirements:

 Download all:

• [SP FLASH TOOL ##download##]
• [Mediatek PC Drivers ##download##] -
• [Flare S5 Firmware ##download##]

First thing to do:

• Backup your phone. YOU WILL LOSE ALL YOUR DATA INCLUDING CONTACTS, MESSAGES, PHONE CALLS, APPS, ETC.
• Self Confident

Procedure:

 Instructions

1. Download all necessary files and Enable USB Debugging mode in your phone..

2. Install Drivers USB_VCOM_Driver.rar

In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.

3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.

You can follow this step :
"How to flash Stockrom using WINDOWS 8"

4.  After installation is finished then Restart your computer, That's it.

5. Open flash_tool.exe, click on the Download Tab
 Extract the downloaded Flare S 5 stock rom to the new folder you created.

6. Click Scatter-loading and browse for the scatter file (MT6753_Android_scatter)

7. For Bootloop only
 Make sure flashing mode is set to "Download Only" and check mark all except Preloader.
Note: If deadboot/hardbrick set "Download+Format" and check Preloader.

8. Click Download.

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.

10. Green Circle image with check will show once flashing is completed. That's it!

11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.

Credits:

Glenn Cañete Sandig  for Stock Rom